Dell PowerVault 750N Aan de slag - Pagina 4

Blader online of download pdf Aan de slag voor {categorie_naam} Dell PowerVault 750N. Dell PowerVault 750N 10 pagina's. Installing microsoft updates and service packs
Ook voor Dell PowerVault 750N: Platform Handleiding (40 pagina's), Handleiding bijwerken (10 pagina's)

Dell PowerVault 750N Aan de slag
When connecting external devices to the back panel of your system, use the following
guidelines:
For information about enabling, disabling, or configuring I/O ports and connectors,
see "Using the System Setup Program" in the User's Guide that came with the NAS
appliance.
Cable the NAS appliance to your Ethernet network.
4
Connect the PowerVault 750N NAS appliance to your Ethernet network using an
Ethernet cable and the integrated Intel
NAS appliance.
Connect the PowerVault 755N NAS appliance to your Ethernet network using an
Ethernet cable and one of the following connectors on the back of the NAS appliance:
For more cabling information, see the User's Guide that came with the appliance.
Install the AC power cables between the power supplies on the back of the system and
5
the electrical outlets.
For more information, see the User's Guide that came with the appliance.
1-2
Us i n g Yo u r A p pl i a n c e fo r t he Fi rs t T i m e
Check the documentation that accompanied the device for specific installation
and configuration instructions. For example, most devices must be attached to a
particular port or connector to operate properly. In addition, it is usually necessary
to install device drivers before the device can operate. Device drivers are normally
included with your operating system software, or with the device itself.
Always attach external devices while your system is turned off. Unless
documentation for the device specifies otherwise, power on the external device
before powering on the system again. (If the system does not seem to recognize
the device, try turning on the system before turning on the device.)
If you have external storage systems, connect them to the NAS appliance using
SCSI cables and the SCSI controller card connectors installed in the PCI slots.
For more information, see the documentation that came with your storage
systems.
Integrated Intel 10/100 NIC
Integrated 64-bit/66 MHz PCI 10/100/1000 Ethernet controller
®
10/100 NIC connector on the back of the