Dell PowerVault MD3000i Configuratiehandleiding - Pagina 8

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell PowerVault MD3000i. Dell PowerVault MD3000i 10 pagina's. Configuration for vmware esx server software
Ook voor Dell PowerVault MD3000i: Handmatig afstemmen (32 pagina's), Ondersteunende opmerking (22 pagina's), Upgrade handleiding (28 pagina's), Gebruikershandleiding (46 pagina's), Vervangingshandleiding (4 pagina's)

8. Select iSCSI software adapter under storage. You should now see your iSCSI Target

name listed.

Figure 8: iSCSI software adapter after initial configuration

9. Select Properties under storage adapters. Select Dynamic Discovery. Select Add.

Provide the IP address of the MD3000i and click OK. There may be a slight delay before

the process completes.

10. Click Close.

6. Configure iSCSI storage on ESX Server

Connect to the ESX server/Virtual Center using VI Client and follow the steps below.

1. Go to the configuration tab and select Storage Adapters. Select the iSCSI Software

Adapter and click Rescan. The newly created iSCSI target and LUN should be visible

from the ESX server.

Dell Inc

Figure 9: iSCSI software initiator properties window

Page 8