Dell PowerVault MD3220i Series Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 18 pagina's. Storage arrays
Ook voor Dell PowerVault MD3220i Series: Uitrolhandleiding (41 pagina's), Handleiding bijwerken (32 pagina's), Instructies voor installatie van het rek (2 pagina's), Informatie-update (1 pagina's), Technisch handboek (38 pagina's), Handmatig (16 pagina's)

Pagina afdrukken
Dell PowerVault MD3220i Series Installatiehandleiding
•
To enable or disable authentication:
# cimconfig -s enableAuthentication={false | true}
–p
•
To add a user for defining the credentials for CIM client to authenticate
with the CIM server:
# cimuser -a -u username -w password
•
To remove a user:
# cimuser -r -u username -w password
•
To enable or disable service location protocol (SLP):
# cimconfig -s slp={true | false} -p
If SLP is enabled, see Table 2-1 for additional settings information.
Commands are of the format
cimconfig -s <propertyName>={true|false} -p
where <propertyName> is a column heading in Table 2-1.
Table 2-1. Additional Setting Information if SLP is Enabled
runinternal
registerExternal
PegasusSLP
PegasusSLP
true
false
false
true
false
false
propertyName
registerExternal
OpenSLP
false
false
true
Installing and Uninstalling the SMI-S Provider
register
Multiple
SLP
false
Internal Pegasus SLP is
started when CIM server
starts.
false
External Pegasus SLP
registration is run in
cimserver with a default
registration timeout set to
3 hours (same as the SLP
default timeout).
false
External OpenSLP
registration is run in CIM
server.
Behavior
9