Dell PowerVault MD3260i Series Handleiding voor probleemoplossing - Pagina 18

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Dell PowerVault MD3260i Series. Dell PowerVault MD3260i Series 18 pagina's. Storage arrays
Ook voor Dell PowerVault MD3260i Series: Handleiding voor hardware en software (25 pagina's), Installatiehandleiding (11 pagina's), Aan de slag handleiding (10 pagina's), Informatie-update (8 pagina's), Instructies voor installatie van het rek (2 pagina's), Instellen (2 pagina's), Handleiding voor probleemoplossing (20 pagina's), Uitrolhandleiding (24 pagina's)

existing management view in MD Storage Manager.

Perform these steps:

1. Obtain the IP address of the RAID controller

you are adding. If the IP address is unknown,

see Using a Serial Cable to Configure Your

Management Port.

2. Start MD Storage Manager and select the MD

storage array containing the RAID controller.

3. From the Setup tab in the Array

Management Window, select Add Storage

Arrays.

4. In the Select Addition Method, select

Manual.

5. In the Add New Storage Array window,

select Out-of-Band management and enter

the IP address of the RAID controller.

6. Click Add.

If you are adding a single RAID controller

module or a new path to a management

port, a confirmation message appears.

7. Select Yes.

The new path and the existing path are

automatically merged.