Dell PowerVault MD3260i Series Uitrolhandleiding - Pagina 8

Blader online of download pdf Uitrolhandleiding voor {categorie_naam} Dell PowerVault MD3260i Series. Dell PowerVault MD3260i Series 24 pagina's. Storage arrays
Ook voor Dell PowerVault MD3260i Series: Handleiding voor hardware en software (25 pagina's), Installatiehandleiding (11 pagina's), Aan de slag handleiding (10 pagina's), Informatie-update (8 pagina's), Instructies voor installatie van het rek (2 pagina's), Instellen (2 pagina's), Handleiding voor probleemoplossing (20 pagina's), Handleiding voor probleemoplossing (18 pagina's)

You choose the data configuration based on:

•

Number of hosts required

•

Level of data redundancy required

Redundant And Non-Redundant Configurations

Non-redundant configurations are configurations that provide only a single data path from a host to the storage array.

This type of configuration is only recommended for non-critical data storage. Path failure from a failed or removed cable,

a failed HBA, or a failed or removed RAID controller module results in loss of host access to storage on the storage

array.

Redundancy is established by installing separate data paths between the host and the storage array, in which each path

is to one of the two RAID controller modules installed in the storage array. Redundancy protects the host from losing

access to data in the event of path failure, because both RAID controller modules can access all the disks in the storage

array.

The following figures show two and four hosts, each connected to two RAID controller modules. Since each host has

redundant paths, loss of a single path would still allow access to the storage array through the alternate path.

Figure 1. Two Hosts Connected to Two Controllers