Dell PS6000 Onderhoud van hardware - Pagina 13

Blader online of download pdf Onderhoud van hardware voor {categorie_naam} Dell PS6000. Dell PS6000 50 pagina's. Storage arrays
Ook voor Dell PS6000: Hardware Handleiding (50 pagina's), Overzicht (7 pagina's), Snelle referentiehandleiding (2 pagina's)

Pagina afdrukken
Dell PS6000 Onderhoud van hardware
PS6000 Hardware Maintenance
Table 1-2: Operations Panel Descriptions (Continued)
Item
Status
N/A
Serial number
label

Using an Electrostatic Wrist Strap

When handling the array chassis, disks, or control modules, you must use an
electrostatic protection device to prevent electrostatic discharge.
An electrostatic wrist strap is included in the shipping box.

Shutting Down and Restarting an Array

A PS6000 array includes redundant, hot-swappable disks, power supplies, and
control modules (if a dual control module array). You can remove a redundant
component without affecting operation if a functioning component is available.
Otherwise, it is recommended that you cleanly shut down the array and turn off
power before removing a component.
Note: When an array is shut down, any volumes with data on the array will be set
offline until the array is successfully restarted. This may affect initiators
that are connected to the volumes.
Description
This label contains the serial number for your array. If
you contact your PS Series support provider, you may
need to provide this number.
Figure 1-4: Electrostatic Wrist Strap
Basic Array Information
1–5