Dell 4322DS Handleiding voor kabelgeleiding - Pagina 10
Blader online of download pdf Handleiding voor kabelgeleiding voor {categorie_naam} Dell 4322DS. Dell 4322DS 13 pagina's. Digital kvm’s
Pagina afdrukken
Mounting and Cable Routing Procedures for Dell™ Digital KVM's (1082DS, 2162DS, 4322DS)
Figure 5: Four Post Rack: Routing Power and Data Cables
3.2 Two Post Flush Mount Cabling
Rack Installation Guide
Follow the instructions contained in the
to install the KVM flush mount into the
two post rack. Once installed, use these instructions to install the cables. All illustrations in the
following sections were created using the Dell KVM 4322DS.
3.2.1
Connecting the Cables to the KVM
Connect all applicable cables to the rear of the system and verify that all connections are secure. See
Figure 7. Note that the back adjustable portion of the rail has been removed to allow access to the tie
down holes used to retain the cables. See Figure 6 (front and back view of the removable portion of
the rail).
Figure 6: Removable portion of rail
Page 8