Dell C7004 Snelstarthandleiding - Pagina 21

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dell C7004. Dell C7004 27 pagina's. Systems

Default Configuration

A version of the Dell Networking OS is pre-loaded onto the chassis, however

the system is not configured when you power up for the first time (except for the

default host name, which is Dell). You must configure the system using the

CLI.

To enable Layer 2 data transmissions through an individual interface, use the

switchport command in INTERFACE mode. You cannot configure switching or

Layer 2 protocols such as the spanning tree protocol (STP) on an interface

unless the interface has been set to Layer 2 mode.

Step Task

Enable the interface.

Place the interface in

Layer 2 (switching)

mode.

To view the interfaces in Layer 2 mode, use the show interfaces switchport

command in EXEC mode.

The host name appears in the prompt. The default host name is Dell.

•

Host names must start with a letter and end with a letter or digit.

•

Characters within the string can be letters, digits, and hyphens.

Task

Create a new host name.

Installing the Software

Command Syntax

no shutdown

switchport

Command Syntax

hostname name

Command Mode

INTERFACE

Command Mode

CONFIGURATION