Earthlite Ellora Flat Top Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Earthlite Ellora Flat Top. Earthlite Ellora Flat Top 20 pagina's. Electric lift table

Pagina afdrukken

TABLE REMOVAL FROM SHIPPING CRATE

All Ellora table models come completely assembled and ready to use.

Recommended Tools Needed

Work Gloves

Unpacking your Ellora

The following steps will guide you through carefully removing your stationary table from the shipping crate.

We recommend wearing work gloves during these steps.

Remove the rectangular cardboard lid from the top of the table. Once you have removed the cardboard lid

and surrounding cardboard walls from shipping crate, you will find the wheels and foot glide levelers are

seated tightly within wood brackets which have been screwed into the plywood base of the shipping crate.

Step 1

With a Phillips #1 screwdriver (or a powered screwdriver),

carefully unscrew and remove the two (2) Front facing wood

brackets from the plywood base. (Diagram A)

We recommend removing only the two (2) front facing wood

brackets (Diagram A) that enclose the foot glide levelers. Do

not remove the rear brackets which enclose the rear wheels

(Diagram B). These brackets are twice as thick as the front

brackets, and will be more difficult to remove.

Step 2

Once the front brackets are removed, carefully pull the table

straight away from the rear brackets and slide the table onto

the floor. We recommend at least two (2) people conduct this

step together. (Diagram C)

Step 3

Once the table is pulled safely away from the shipping crate,

make sure the path from the table to your preferred destination

is clear of any obstacles or tripping hazards. (Diagram D)

If you did not have your table shipped with 'white glove' service, you may be

required to remove your table from its shipping crate. We highly recommend

that at least two people conduct the following steps to uncrate the table.

Phillips #1 Screw Driver

Stationary Table

™

It is possible to lift the table directly out

of the shipping crate without removing

any of the wood brackets, but this is not

recommended because the weight of the

table is at least 180 lbs.