Dell Force10 S25V Snelstarthandleiding - Pagina 21

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dell Force10 S25V. Dell Force10 S25V 27 pagina's.

The S25N, S25V, and S25P systems do not have a dedicated management port,

nor a separate management routing able. Configure any port on one of the

chassis to be the port through which you manage the system and configure an IP

route to that gateway.

Step Task

Configure an IP address for the

port through which you will

manage the system.

Configure an IP route with a

default gateway.

Configure a username and

password.

Configure the Management Port IP Address

Assign IP addresses to the management ports in order to access the system

remotely.

NOTE: Assign different IP addresses to each RPM's management port.

Step Task

Enter INTERFACE

mode for the

Management port.

Assign an IP address

to the interface.

Enable the interface.

Configure a Management Route

Define a path from the system to the network from which you are accessing the

system remotely. Management routes are separate from IP routes and are only

used to manage the system through the management port.

Command Syntax

ip address

ip route

username

Command Syntax

interface ManagementEthernet

slot/port

ip address ip-address/mask

no shutdown

Command Mode

INTERFACE

CONFIGURATION

Command Mode

CONFIGURATION

INTERFACE

Installing the Software