Dell Networking 8100 Series Configuratiehandleiding - Pagina 9

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell Networking 8100 Series. Dell Networking 8100 Series 17 pagina's. Expansion modules for dell networking switches
Ook voor Dell Networking 8100 Series: Start Here (2 pagina's), Start Here (2 pagina's), Installatiehandleiding (2 pagina's), Referentiehandleiding (17 pagina's)

Dell Networking 8100 Series Configuratiehandleiding
Would you like to run the setup wizard (you must answer this question within 60
seconds)? [Y/N] N
2.3

Disable DCB

Note: If you plan to configure DCB (using Section 3) skip this section. For non-DCB environments, DCB
must be manually disabled using the following steps:
console>enable
console#configure
console(config)#no dcb enable
console(config)#exit
2.4

Configure out of band (OOB) management port

console>enable
console>#configure
console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
2.5

Http and Telnet authentication

console>enable
console#config
console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
2.6

Configure login credentials

console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword
9
SCG1001
Dell Networking N4000 Series and Dell PowerConnect 8100 Series Configuration Guide