Dell Networking N3048P Referentiehandleiding - Pagina 13
Blader online of download pdf Referentiehandleiding voor {categorie_naam} Dell Networking N3048P. Dell Networking N3048P 17 pagina's. Expansion modules for dell networking switches
Ook voor Dell Networking N3048P: Firmware-upgrade (21 pagina's)
Pagina afdrukken
4
Rack Switches and Corresponding Modules
This section identifies each Dell Networking rack-mounted switch that supports expansion modules, lists each
corresponding expansion module, and provides a brief overview of each to help identify the correct module for its
purpose.
A picture of each switch is provided below. Under each switch are pictures of supported modules with descriptions
and Dell part numbers for identification and ordering.
4.1
Dell Networking N3000 Series (N3024, N3024F, N3024P, N3048,
N3048P)
There are five different switch models in the Dell Networking N3000 series, each with one expansion slot located on
the back of the chassis. The following modules are supported:
10BBASE-T module
SFP+ module
Each expansion module has two ports. The modules are hot-swappable, so modules can be installed without
rebooting the switch. The yellow outlines in Figure 7 show the expansion slot for each switch.
Figure 7
Dell Networking N3000 Series Switch (1G Ethernet) and Available Modules
NOTE: The N2000 series switches (N2024, N2024P, N2048, and N2048P) do not support expansion modules.
13
Expansion Modules for Dell Networking Switches