Dell Networking S4810 Configuratiehandleiding - Pagina 14

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell Networking S4810. Dell Networking S4810 17 pagina's. Open networking
Ook voor Dell Networking S4810: Specificaties (2 pagina's), Configuratiehandleiding (17 pagina's), Installatiehandleiding (42 pagina's), Aan de slag handleiding (16 pagina's)

Optional stack configuration

Note: If you wish to use a stack configuration instead of LAG, follow the instructions below instead of

Section 2.

One advantage of stacked switches is that they can be managed as a single switch; however firmware

updates will update all members of the stack simultaneously and therefore should only be done during

planned downtime.

5.1

FTOS>enable

FTOS#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

FTOS#reload

System configuration has been modified. Save? [yes/no]no

Proceed with reload [confirm yes/no]yes

Note: The switch will reboot.

5.2

FTOS>enable

After the startup configuration is deleted, the factory default Enable mode password is force10.

FTOS#config

FTOS(conf)#stack-unit 0 priority 1

FTOS(conf)#stack-unit 0 stack-group 12

FTOS(conf)#stack-unit 0 stack-group 13

FTOS(conf)#exit

FTOS#copy running-config startup-config

FTOS#reload

5.3

FTOS>enable

FTOS#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

FTOS#reload

System configuration has been modified. Save? [yes/no]no

Proceed with reload [confirm yes/no]yes

SCG1000 | Dell Networking S4810 and Force10 S4810 Configuration Guide for EqualLogic SANs