Dell Networking S5000 Aan de slag handleiding - Pagina 29
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell Networking S5000. Dell Networking S5000 37 pagina's. Data center switch
Ook voor Dell Networking S5000: Installatiehandleiding (50 pagina's), Configuratiehandleiding (12 pagina's), Configuratiehandleiding (17 pagina's)
Pagina afdrukken
Figure 23. RS-232/RJ-45 Console Port
Accessing the RJ-45 Console Port with a DB-9 Adapter
You can connect to the console using an RJ-45 to RJ-45 rollover cable and an RJ-45 to DB-9 female DTE adapter to a
terminal server (for example, a PC).
The pin assignments between the console and a DTE terminal server are as follows:
Table 6. Pin Assignments Between the Console and a DTE Terminal Server
S5000 Console Port
RJ-45 to RJ-45
Rollover Cable
Signal
RJ-45 Pinout
RTS
1
NC
2
TxD
3
GND
4
GND
5
RxD
6
NC
7
CTS
8
Accessing the USB-B Console Port
The terminal settings are the same for the USB-B port and the console port:
•
9600 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is connected, it sends all
messages to the USB-B drive.
RJ-45 to RJ-45
RJ-45 to DB-9 Adapter Terminal Server
Rollover Cable
RJ-45 Pinout
DB-9 Pin
8
8
7
6
6
2
5
5
4
5
3
3
2
4
1
7
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS
29