Dell PowerConnect 8024 Configuratiehandleiding - Pagina 10
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell PowerConnect 8024. Dell PowerConnect 8024 21 pagina's. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Ook voor Dell PowerConnect 8024: Release-opmerkingen (27 pagina's), Release-opmerkingen (20 pagina's), Firmware upgraden (24 pagina's)
Pagina afdrukken
3
Dell recommended switch configuration for M8024 and
M8024-k
These steps show you how to configure two PowerConnect M8024 or M8024-k series switches with a
LAG. The switches are interconnected using four 10 GbE Small Form-factor Pluggable (SFP+) ports, and
the LAG is configured for Dynamic Link Aggregation Control Protocol (LACP).
3.1
Cabling diagram for M8024 and M8024-k
The cabling diagram shown below represents the Dell recommend method for deploying your servers and
EqualLogic arrays.
Figure 2
10
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs
Cabling diagram