Dell PowerConnect 8024F Configuratiehandleiding - Pagina 8
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell PowerConnect 8024F. Dell PowerConnect 8024F 21 pagina's. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Ook voor Dell PowerConnect 8024F: Release-opmerkingen (27 pagina's), Release-opmerkingen (20 pagina's), Implementatiehandleiding (8 pagina's), Firmware upgraden (24 pagina's)
Pagina afdrukken
2.6
Configure out of band (OOB) management port
console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
2.7
Configure login credentials
console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword
2.8
Configure Jumbo Frames
console(config)#interface range tengigabitethernet all
console(config-if)#mtu 9216
console(config-if)#exit
2.9
Enable flow control
console(config)#flowcontrol
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to continue? (y/n)y
2.10
Configure spanning tree portfast on edge ports
console(config)#interface range tengigabitethernet 1/0/1-20
console(config-if)#spanning-tree portfast
console(config-if)#exit
8
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs