Dell PowerEdge M IO Aggregator Aan de slag handleiding - Pagina 8

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell PowerEdge M IO Aggregator. Dell PowerEdge M IO Aggregator 38 pagina's. Dell poweredge m i/o aggregator getting started guide

Pagina afdrukken

1. Internal Ports

Hardware Overview

This section contains information about device characteristics and modular

hardware configurations for the Aggregator.

Internal Ports

The Aggregator provides thirty-two 1/10-Gigabit Ethernet internal ports. The

internal ports are connected to server blades through the M1000e chassis

midplane. Each port can operate in either 1GbE or 10GbE mode.

The Aggregator also provides an internal Ethernet interface—the out-of-band

(OOB) interface—which is dedicated to switch management. Traffic on this

port is segregated from operational network traffic on the switch ports and

cannot be switched or routed to the operational network.

Front Panel

Figure 1-1 shows the Aggregator front panel:

Figure 1-1. I/O Aggregator Front Panel

Activity and Link Status LEDs

USB Storage Port

USB Console Port

Expansion Slot 0

Expansion Slot 1

40GbE QSFP+ Ports

Base Module with 40GbE Ports

The Aggregator provides two fixed 40-Gigabit Ethernet ports on the base

module. By default, these ports operate in 4x10GbE mode with breakout cables

and support up to eight 10GbE uplinks. You can also use the base-module ports

as 40GbE links for stacking.

Hardware Overview