Dell PowerEdge M1000e Aan de slag handleiding - Pagina 4

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell PowerEdge M1000e. Dell PowerEdge M1000e 14 pagina's. Expansion modules for dell networking switches
Ook voor Dell PowerEdge M1000e: Handleiding bijwerken (44 pagina's), Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag handleiding (12 pagina's), Specificaties (3 pagina's), Handleiding gebruiken (44 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag (2 pagina's), Referentiehandleiding (17 pagina's)

Figure 2. Installing a Sleeve

NOTE: Before you install or remove a sleeve from the enclosure, ensure that the top slot of the sleeve (Blade a) is

empty. You can install a blade in the top slot (Blade a) after you install the sleeve in the enclosure.

Remove the orange cover from the sleeve handle. Slide the sleeve into the enclosure and lift the sleeve handle to the top

position to secure the sleeve in the enclosure.

NOTE: To ensure optimal thermal performance, do not replace the cover on the sleeve handle after the sleeve is

installed in the enclosure. Reinstall the cover only if the sleeve is not installed in the enclosure.

Installing A Quarter-Height Blade In A Sleeve

CAUTION: Install a blade blank in all empty blade slots to maintain proper thermal conditions.

Slide the blade into the sleeve and rotate the blade handle upward to secure the blade in the sleeve.

Figure 3. Installing a Quarter-Height Blade

Installing A Full Or Half-Height Blade

CAUTION: Install a blade blank in all empty blade slots to maintain proper thermal conditions.