Dell PowerEdge M420 Handmatig - Pagina 20

Blader online of download pdf Handmatig voor {categorie_naam} Dell PowerEdge M420. Dell PowerEdge M420 25 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M420: Informatie-update (38 pagina's), Release-opmerkingen (27 pagina's), Gebruikershandleiding (23 pagina's), Belangrijke informatie Handleiding (35 pagina's), Handleiding bijwerken (32 pagina's), Handleiding bijwerken (28 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (22 pagina's), Aan de slag handleiding (12 pagina's), Handmatig (38 pagina's), Technisch handboek (46 pagina's), Technisch handboek (48 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Rev 1.00

Example:

# show port module 1

Status......................................... OK

Gigabit Ethernet Compliance Codes.............. 10GBASE-SR

Vendor Name.................................... FINISAR CORP.

Vendor Part Number............................. FTLX8571D3BCL-ME

Vendor Serial Number........................... UDD01@A

Vendor Revision Number......................... A

3.7.4 show port test (ADMIN)

Synopsys:

show port test port_number

Description:

Show test mode on the specified downlink port port_number.

Example:

& show port test 4

port 4 test off

& show port test 6

port 6 prbs31 on: 0 errors

3.8

Synopsys:

cr_read device_number 0xaddress [number_of_

Description:

Read one or more internal PhyX device register. This command accepts the following parameters:

• device_number – the device from which to read a register (1..3)

• address – the register memory location from which to read (32-bit address)number_of_registers

(Optional) - Specifies the number of registers to read (default 1)

Example:

•

& cr_read 2 0xf0014

0x000f0014:0x00a217d4

Synopsys:

cr_write device_number 0xaddress 0xdata

registers

]

Software User's Manual