Dell PowerEdge M520 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerEdge M520. Dell PowerEdge M520 26 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M520: Informatie-update (38 pagina's), Release-opmerkingen (27 pagina's), Handmatig (25 pagina's), Gebruikershandleiding (23 pagina's), Belangrijke informatie Handleiding (35 pagina's), Handleiding bijwerken (32 pagina's), Handleiding bijwerken (28 pagina's), Gebruikershandleiding (22 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (46 pagina's), Technisch handboek (45 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Rev 1.00

Connecting to the 10GbE PTM CLI

If you are connecting to the system over a network, you will need an SSH client that supports

ZModem file transfer. The examples in this document use Secure CommNet v2.35 (download

from www.radient.com). After you download the software, some initial configuration is necessary.

Please follow the next configuration steps; when using a different client software, similar settings

should be available.

If you are connecting directly to the serial port of the Chassis Management Console (CMC), skip

to step (9).

1. Go to Setup => SSH2 settings, and set the compression to

2. Go to Setup => Terminal Settings

Figure 4: Setup > SSH2 Settings

Figure 5: Set Compression to "none"

none

Software User's Manual