Dell PowerEdge M620 Technisch handboek - Pagina 24

Blader online of download pdf Technisch handboek voor {categorie_naam} Dell PowerEdge M620. Dell PowerEdge M620 44 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M620: Informatie-update (38 pagina's), Release-opmerkingen (27 pagina's), Handmatig (25 pagina's), Gebruikershandleiding (23 pagina's), Belangrijke informatie Handleiding (35 pagina's), Handleiding bijwerken (32 pagina's), Handleiding bijwerken (28 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (22 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (46 pagina's), Technisch handboek (49 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Pagina afdrukken

Table 13 lists the available Select Network Adapter options and their supported features for the

M620.

Features

Ports x link

speed

Supported

speed

SR-IOV

ISCSI HBA

FCoE

Switch

independent

partitioning

DCB

DCB with

iSCSI TLV

Ports x link

speed

Only 10GbE ports have iSCSI HBA support.

Only 10GbE ports have FCoE support.

Only 10GbE ports have switch independent partitioning support. The maximum number of

partitions supported is eight (four partitions per 10GE port).

Only 10GbE ports have DCB support.

Only 10GbE ports have ISCSI TLV support.

With M620, the job of deploying, updating, monitoring, and maintaining the Select Network

Adapters is fast and easy. System management integration features include the following:

Pre-boot: Use the Dell Lifecycle Controller graphical user interface (GUI) to set configuration



such as bandwidth allocation or firmware revision level.

Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the



Operating System/BMC pass-thru feature for sensory information.



Automation of firmware and driver version deployment upon component replacement.

Automatic monitoring of NIC status and notification on SNMP traps.



Local or remote re-configuration of any NIC, physical or virtual.



PXE boot enabled on all LOM and NDCs for ease of use.

Boot from SAN (iSCSI, FCoE) configuration for networking devices through the USC.



PowerEdge M620 Technical Guide

Broadcom

Intel

57810S KR

2x10Gb

1Gb and 10Gb

Not supported

Supported

Not supported

Supported

Not supported

Supported

Not supported

Supported

2x10Gb

X520

QLogic

QMD8262 KR

2x10Gb

10Gb only

Not supported

Supported

2x10Gb