Dell PowerEdge M710 Handleiding bijwerken - Pagina 2

Blader online of download pdf Handleiding bijwerken voor {categorie_naam} Dell PowerEdge M710. Dell PowerEdge M710 21 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M710: Informatie-update (38 pagina's), Handleiding bijwerken (44 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Handleiding bijwerken (1 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (31 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Pagina afdrukken
Dell PowerEdge M710 Handleiding bijwerken
Table 1. Power Specifications
Hardware
Blade - Model 10G-MAG
(Dell PowerEdge M605)
Blade - Model 10G-TOM
(Dell PowerEdge M600)
Blade Messages
Table 2 updates the following blade messages listed in your Hardware Owner's
Manual:
"This system does not support processors greater than 95W." has been
•
revised.
•
"This system only supports AMD™ Opteron™ 2000 series processors.
System halted. (PowerEdge M605 only)" is no longer applicable and has
been deleted from the BIOS.
Table 2. Blade Messages
Message
This system does
not support
Opteron SE
processors.
Rating
12VDC, 33.33A
12VDC, 35A
Causes
Unsupported processor(s)
installed.
Corrective Actions
Replace the processor(s)
with a supported version.
See "Processors"
on page 113.