Dell PowerEdge M710 Aan de slag handleiding - Pagina 5

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell PowerEdge M710. Dell PowerEdge M710 12 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M710: Informatie-update (38 pagina's), Handleiding bijwerken (44 pagina's), Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Handleiding bijwerken (1 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (31 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Figure 4. Installing a Half-Height Blade

NOTE: The above figure shows installation of a half-height blade. The procedure for installing a full-height blade is

identical to installing a half-height blade.

Beginning at the top, slide the blades into the enclosure from left to right. When the blade is securely installed, the blade

handle returns to the closed position.

Connecting The CMC And iKVM Modules

Figure 5. Connecting the Modules

Connect the serial cable and network cable(s) from the management system to the CMC module. If a second optional

CMC module is installed, connect it as well.

Connect the keyboard, mouse, and monitor to the optional iKVM module.