Dell PowerEdge M820 Systems Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerEdge M820 Systems. Dell PowerEdge M820 Systems 22 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M820 Systems: Informatie-update (38 pagina's), Release-opmerkingen (27 pagina's), Gebruikershandleiding (23 pagina's), Belangrijke informatie Handleiding (35 pagina's), Handleiding bijwerken (32 pagina's), Handleiding bijwerken (28 pagina's), Gebruikershandleiding (26 pagina's), Aan de slag handleiding (12 pagina's), Gebruikershandleiding (3 pagina's), Technisch handboek (46 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (47 pagina's)

Dell -10GbE PTM

About this Manual

This User Manual is for the Dell 10Gb Ethernet Pass Through II passs through module.

This manual describes the installation and basic use of Dell 10GbE 16 port Pass Through Module

for blade servers.

Intended Audience

This manual is intended for users and system administrators responsible for installing and setting

up the Dell 10GbE 16 port Pass Through Module for blade servers.

The terms downlink (internal–from servers) and uplink (external–out to the world) are used

throughout the document. Downlink refers to server connections through the backplane where

Ethernet is used. Uplink refers to the outside network, where a different Ethernet protocol is used.

The term PTM is used to indicate the Dell 10GbE 16 port Pass Through Module.

Caution: This symbol indicates the possibility of physical injury to the user or

installer.

Rev 1.0