Dell PowerEdge M910 Handleiding bijwerken

Blader online of download pdf Handleiding bijwerken voor {categorie_naam} Dell PowerEdge M910. Dell PowerEdge M910 44 pagina's. M-series blade servers
Ook voor Dell PowerEdge M910: Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Handleiding bijwerken (28 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (46 pagina's), Portfolio Handleiding (27 pagina's), Technisch handboek (45 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (49 pagina's)

Intel Xeon 5600 Series Processors—

Information Update

Important Information

•

Your system requires a BIOS and iDRAC firmware upgrade to support Intel

Xeon 5600 series processor (less than 130 W). You can download the BIOS and

iDRAC firmware for the Intel Xeon 5600 series processor at support.dell.com.

NOTE:

A BIOS and iDRAC firmware update only supports a limited feature set of

the Intel Xeon 5600 series processor.

•

The following new Dell PowerEdge systems marked with the Roman Numeral

II on the chassis support the complete feature set of Intel Xeon 5600 series

processors:

–

R410

–

R510

–

R610

–

R710

–

T410

–

T610

–

T710

–

M610

–

M710

NOTE:

The PowerEdge R410, T410, and R510 systems do not support 130 W

Intel Xeon 5600 series processors.

NOTE:

The modular systems, PowerEdge M610 and M710, support the 130 W

Intel Xeon X5680 only in the 130 W processor category.

NOTE:

The PowerEdge R610 and M710 systems need specific heat sinks to

support the 130 W Intel Xeon 5600 series processors.

•

Mixing of Intel Xeon 5500 and 5600 series processors is not supported.

•

Systems with the Intel Xeon 5600 series processors support memory sparing.

December 2010