Dell R1-2401 Aan de slag handleiding - Pagina 10

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell R1-2401. Dell R1-2401 30 pagina's. Poweredge vrtx switch modules
Ook voor Dell R1-2401: Aan de slag handleiding (20 pagina's)

Pagina afdrukken

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

NOTE:

CLI and/or GUI need only be used if the default configuration is not

sufficient.

The switch can be configured in the following modes from the GUI:

•

Basic — Elementary network configuration for the switch.

•

Advanced — Full network configuration mode that enables configuration

of all switch capabilities. This mode is intended for advanced network

administrators.

To logon to the switch after it is inserted into the chassis, perform the

following:

1 Turn on the chassis. To display the IP address configured for the out-of-

band interface, go to the CMC GUI, options: I/O Module Overview >

Setup

2 Log on to the switch in one of the following ways:

–

Establish a Telnet session to the out-of-band IP address obtained in

the last step, and log on with the default user/password: root/calvin.

Continue managing the switch through the CLI (see "Using the CLI"

on page 11).

–

Open a GUI session from the CMC GUI, options: I/O Module

Overview > Properties > Launch IOM GUI. In the Login menu,

select either Basic or Advanced mode and use the default

user/password: root/calvin. Continue managing the switch through

the Network Administrator.

–

Connect to the IOM serial interface through the CMC. For that, use

the CMC command: connect switch. For more informations on this,

consult the

dell.com/support/manuals.

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY

Hardware and Initial Configuration

Plasma\GSG\Plasma_UGHW&InitialConfiguration.fm

CMC Command Line Reference

from