Dell S3100 Series Aan de slag handleiding - Pagina 21
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell S3100 Series. Dell S3100 Series 27 pagina's.
Ook voor Dell S3100 Series: Aan de slag handleiding (46 pagina's), Installatiehandleiding (45 pagina's)
Pagina afdrukken
INTERFACE mode
no shutdown
Configuring the Management Route
Define a path from the switch to the network from which you will remotely
access the system.
Management routes are separate from IP routes; they manage the system
through the management port.
•
Configure a management route to the network from which you will
access the system.
CONFIGURATION mode
management route ip-address/mask gateway
Configuring the Username and Password
To access the system remotely, configure a system username and password.
•
Configure a username and password to access the system remotely.
CONFIGURATION mode
username username password [encryption-type]
Configuring the Enable Password
Access EXEC Privilege mode using the enable command. EXEC Privilege
mode is unrestricted by default.
As a basic security measure, configure a password. There are two types of
enable passwords:
•
enable password — stores the password in the running/startup
configuration using a data encryption standard (DES)-encryption method.
•
enable secret — stores the password in the running/startup configuration
using a stronger, MD5-encryption method.
Dell Networking recommends using the enable secret password.
•
Create a password to access EXEC Privilege mode.
CONFIGURATION mode
Installing the Software
21