Entech U-BLUE Bedieningshandleiding - Pagina 11

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Entech U-BLUE. Entech U-BLUE 15 pagina's. Undersink alkaline water ionizer

How to Replace the Filter

IMPORTANT! Stop water flow prior to filter replacement.

When the LED filter life indicator lighting,

it is time to replace your filter.

Open the filter housing cover.

First, slide the cover upwards (figure 1) then,

slide the cover to the left (figure 2) and remove it.

Remove the expired filter.

- Taking hold of the filter securely with your right hand,

press the filter firmly down against the spring loaded

mechanism (figure1) to disengage the top of the filter

and then pull it toward you (figure2) and up to remove it.

- The upper part of the filter is separated from housing by

pressing firmly down. Once you have engaged the spring

loaded mechanism, you can then easily remove the filter

from the main body by pulling it toward you.

Insert the new filter into the compartment.

- Remove the plastic caps covering both ends of the new filter.

- Seat the large opening on the bottom of the filter cartridge

onto the base in the center of the filter cushion.

- Push the filter down and into the housing compartment

ensuring the opening at the top of the filter is seated

properly into the fitting at the top of the housing.

Check for leakage by running water through your ionizer

before replacing the housing cover.

Flush out the GAC carbon dust.

- The water will initially come out discolored (light to charcoal

gray) due to carbon particulates in the new filter.

This is not harmful and is typical of all GAC filters.

Allow the water to flow for 2-3 minutes in the "Purified" mode

and this will flush all the carbon dust.

Immediately after filter replacement, the water will come

out black and unclear due to the activated carbon particulates

in the new filter but will become clear momentarily.

(It is not harmful.)

Press the reset button(Alkaline Button) located on the top of the faucet,

and depress for 3 seconds.

NOTE: When filter life indicator is reset, and also when

machine is new, no lighting will be showing.

for 3 seconds