Dell C5765DN Sjabloonhandleiding - Pagina 10

Blader online of download pdf Sjabloonhandleiding voor {categorie_naam} Dell C5765DN. Dell C5765DN 14 pagina's. Color laser multifunction printer with high capacity feeder, blue angel information (ral-uz171)
Ook voor Dell C5765DN: Handmatig (1 pagina's), Aanvullende handleiding (27 pagina's)

Pagina afdrukken
Dell C5765DN Sjabloonhandleiding
User Information Per Blue Angel Mark Requirements of RAL-UZ171
Energy data
Information on the Device Dell™ C5765dn Color Laser Multifunction
Printer with High Capacity Feeder
150
100
print mode
50
10
0
Electric power consumption of a device depends both on its characteristics
and on the way you use it. Your device is designed and pre-set so that you can
save electricity costs. It switches over to the mode "ready" after the last copy.
From there, the device can immediately start printing again if required. If not
required, the device switches over to electric power saving modes in two steps
after a certain time, which is called activation time. In these modes, it
consumes less power (watt). The device will take some more time to print
again from an electric power saving mode than from the mode "ready". This
delay is called return time, which is quite long for some devices. The device
Dell™ C5765dn Color Laser Multifunction Printer with High Capacity
Feeder, however, fulfills the strict Blue Angel requirements for the return time
(http://www.blauer-engel.de). It only takes 16 seconds, for example, to return
from Energy saving mode 2 to ready mode for printing. This is only a short
moment for you but will help you to save electricity and hence operating costs
if the device is pausing (hence, during no-load operation).
The device is so designed in such a way that switching it on and off up to
twice a day to the plug-in off mode will not cause damage.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 2 0 / 1 3 – F O R P R O O F O N LY
Power consumption and default times
of Dell C5765dn Color Laser Multifunction Printer with High Capacity Feeder
during time elapsed after last print
Ready mode (130W)
Time elapsed after last printing = idle mode [minutes]
Energy saving mode 2 (3.5W)
time (min.)
10
8