Allied Vision Goldeye G Series Snelstarthandleiding - Pagina 14

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Allied Vision Goldeye G Series. Allied Vision Goldeye G Series 17 pagina's.

Connecting to the host computer

To connect the camera to the host computer, use a Category 5e cable or higher.

1. Power up the camera and wait until the Ethernet Status LEDs stop blinking.

This indicates booting has been finished.

2. Launch the Vimba Viewer application and wait for the camera to appear in

the Detected Cameras list. This may take a few seconds, depending on the

number of cameras connected to the PC and the number of installed frame

grabbers.

3. Select the desired camera from Detected Cameras list.

4. A new camera window appears, as shown on page 15.

To start continuous image acquisition, using default camera settings, click on the

freerun button in the viewer toolbar. The freerun button is used to start and

stop the live view.