3 Star 3S-31 Instructieblad - Pagina 3

Blader online of download pdf Instructieblad voor {categorie_naam} 3 Star 3S-31. 3 Star 3S-31 3 pagina's. Adjustable eave mount antenna mast bracket

Step 2: Assembling the L brackets

Step 3: Attaching the

saddle clamp to the L

brackets

Step 4: Mounting the W

bracket and L brackets

Step 5: Attaching the

antenna mast

Step 1

Before starting, lay out all parts to your mount and match them to

the parts list provided. Verify that you have all your parts before

attempting to assemble the mount. Note: It is highly recommend-

ed that the installation of the mount be done by a professional.

Step 2

Assemble the two L brackets at the desired span by using two of

the short 5/16" diameter cup square bolts and KEP nuts through the

slots cut into the L brackets as shown.

Step 3

Attach the saddle clamp to the combined L brackets with two

long cup square bolts and two more KEP nuts.

Step 4

Mark the eave with the desired mounting location in preparation

of installation of the L brackets and remaining W bracket to

the gable. Pre-drill, if necessary, and mount the L brackets and

remaining W bracket to the gable. Note: Make sure to line up the

saddle clamp and W bracket properly as the antenna mast will be

squeezed between them. Warning: Please verify that your mounting

surface will support the combined weight of your mount, mounting

hardware, and antenna mast. Also verify that the mounting surface

is safe to drill through. If in doubt, please contact a professional

installer.

Step 5

Place the antenna mast into the notch in the W brackets. Place

clamp plate on the opposite side of the antenna mast and use

either the long ¼" diameter screws or the U bolts and hex nuts to

tighten down the clamp plate onto the antenna mast clamping it

in place. The ¼" diameter screws are show in the picture. Please

verify that all nuts and screws are securely tightened.

Enjoy Your Mount!

WARNING: The installer must verify the installation meets all ap-

plicable codes and survival requirements.

be held liable for the improper use or installation of its

products.

will not