EarthQuake 9800 Series Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} EarthQuake 9800 Series. EarthQuake 9800 Series 19 pagina's. Two-man earth auger powerhead
Ook voor EarthQuake 9800 Series: Gebruikershandleiding (16 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (20 pagina's)
Pagina afdrukken
Operator's Manual
Two-Man Earth Auger Powerhead 9800 Series
Earthquake
GENERAL SAFETY RULES
Read, understand, and follow all instructions on the machine
and in the man ual(s). Be thoroughly familiar with the controls
and the proper use of the machine before starting.
Use this equipment for its intended purpose only.
Familiarize yourself with all of the safety and operating
decals on this equipment and on any of its attachments or
accessories.
Do not put hands or feet near or under rotating parts.
Only allow responsible individuals who are familiar with the
instructions to operate the machine. Do not allow children
to operate this machine. Do not allow adults to operate the
machine without proper instruction.
Thoroughly inspect the area where the machine is to be
used and remove all foreign objects. Your equipment can
propel small objects at high speed causing personal injury
or property damage. Stay away from breakable objects, such
as house windows, automobile, greenhouses, etc.
Wear appropriate clothing such as a long-sleeved shirt or
jacket. Also wear long trousers or slacks. Do not wear shorts.
Never wear sandals, sneakers, or open shoes, and never
Operate the machine with bare feet.
Do not wear loose clothing or jewelry.They can get caught in
moving parts. Always keep hands, feet, hair and loose clothing
away from any moving parts on engine and machine.
Always wear safety goggles or safety glasses with side shields
when operating the machine to protect your eyes from
foreign objects which can be thrown from the unit. Always
wear a protective hearing device.
Always wear work gloves and sturdy footwear. Wear
footwear that will improve footing on slippery surfaces.
Leather work shoes or short boots work well for most people.
These will protect theoperator's ankles and shins from small
sticks, splinters, and other debris.
It is advisable to wear protective headgear to prevent the
possibility of being struck by small flying particles, or being
struck by low hanging branches, twigs, or other objects
which may be unnoticed by the operator.
Do not operate the machine without proper guards or other
safety protective devices in place.
See manufacturer's instructions for proper operation and
installation of accessories. Only use accessories approved
by the manufacturer.
Operate only in daylight or good artificial light.
Do not operate product when fatigued or under the
influence of alcohol, drugs or other medication which
can cause drowsiness or affect your ability to operate this
machine safely.
Watch for traffic when operating near, or when
crossing roads.
If the equipment should start to vibrate abnormally, stop the
engine (motor), disconnect the spark plug wire and prevent
it from touching the spark plug. Check immediately for cause.
Vibration is generally a warning of trouble. lithe noise or
vibrations of the machine increase, stop immediately and
perform an inspection.
Never leave the machine unattended when the engine is
running.
Regularly inspect the machine. Make sure parts are not bent
damaged or loose. Keep all screws, nuts and bolts tight.
Temperature of muffler and nearby areas may exceed 150° F
(65°C). Allow muffler and engine areas to cool before touching.
Never pick up or carrythe machine while the engine is running.
Prolonged exposureto noise and vibrationfrom gasoline engine-
powered equipment should be avoided. Take intermittent
breaks and/or wear ear protection from engine noise as well as
heavy work gloves to reduce vibration in the hands.
Do not transport the machine from one place to another
with the engine running.
When moving the packaged machine, always do so with a
partner.
Check local regulations for age restrictions on use of this
machine.
PRODUCT-SPECIFIC SAFETY RULES
Do not drill above underground utilities, including water
lines, gas lines, electric cables, or pipes. Do not operate the
auger in soil with large rocks and foreign objects which can
damage the equipment
Afterstriking a foreign object, stop the engine. Removethe wire
from the spark plug. Inspect the auger for damage. If damaged,
repair before starting and operating the auger.
The blades of the auger should not rotate when the engine
is idling. If it does rotate when engine is idling, contact
customer service for instructions.
If an object becomes lodged in the auger, turn engine off,
remove the wire from the spark plug and secure, allow to
cool before attempting to remove the foreign object.
The earth blade is very sharp. Use extreme caution when
drilling a hole or replacing the blade.
Do not carry the earth auger unit between holes with the
engine running.
4
Check for parts online at
www.getearthquake.com
or call 800-345-6007 M-F 8-5