360 Fitness YK-BK1704 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 360 Fitness YK-BK1704. 360 Fitness YK-BK1704 14 pagina's. Spinning bike

ASSEMBLY INSTRUCTION:

1.PREPARATION:

A. Before assembling make sure that you will have enough space around the item.

B. Use the present tooling for assembling.

C. Before assembling please check whether all needed parts are available (at the above

of this instruction sheet you will find an explosion drawing with all single parts (marked

with numbers) which this item consists of.

2.ASSEMBLY INSTRUCTION:

FIG.1

FIG.2

FIG.1:

Attach the Front Stabilizer (pt.15) to the

Main Frame (pt.16) using two sets of Ø10

Flat Washers (pt.5), M10 Domed Nut (pt.6)

and M10*90

Attach the Rear Stabilizer (pt.4) to the Main

Frame (pt.16) using two sets of Ø10 Flat

Washers (pt.5), M10 Domed Nut (pt.6) and

M10*90 Carriage bolt (3).

FI G.2:

Slide the Vertical Seat Post (pt.10) into the

seat post housing on the main frame

(pt.16). Then slide the Seat Post (pt.12)

into the Vertical Seat Post (pt.10),then

Secure using a flat washer 1 (20) and

Locking knob (21).You will have to

slacken the knurled section of the L

Shape Knob (pt.7) and pull the knob back

and then select the desired height.

Release the knob and retighten the

knurled portion.

Now fix the Seat (pt.13) to the Seat Post

(pt.12) as shown, and tighten the bolts

around the screws under the seat.

Carriage bolt (3).