Allied Vision Goldeye CL-033 SWIR Snelstarthandleiding - Pagina 13
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Allied Vision Goldeye CL-033 SWIR. Allied Vision Goldeye CL-033 SWIR 17 pagina's.
Pagina afdrukkenConnecting to the host computer
To connect the camera to the host computer, use a Camera Link cable with an
SDR-26 connector for the camera side.
To retrieve information about the required connector type for the frame
grabber (either MDR-26 or SDR-26), refer to the frame grabber manual.
Launch the applications
1. Power up the camera and wait until the Camera Link Status LED stops
blinking. This indicates booting has been finished.
2. Launch the Vimba Viewer application and wait for the camera to appear in
the Detected Cameras list. This may take a few seconds, depending on the
number of cameras connected to the PC and the number of installed frame
grabbers.
3. Select the desired camera from Detected Cameras list.
4. A new camera window appears.
13