EarthWay 1001-B Montagehandleiding - Pagina 2

Blader online of download pdf Montagehandleiding voor {categorie_naam} EarthWay 1001-B. EarthWay 1001-B 7 pagina's. Precision garden seeder
Ook voor EarthWay 1001-B: Montage- en bedieningshandleiding (5 pagina's), Gebruiksaanwijzing (5 pagina's), Montagehandleiding (8 pagina's)

Pagina afdrukken

ASSEMBLY INSTRUCTIONS

REAR WHEEL

STEP 1: Lower Kick stand at front to hold planter upright.

STEP 2: Remove nut, bolt, and axle from frame.

STEP 3: Insert axle through Rear wheel, then place the

wheel between frame, and line up with holes in end of frame.

STEP 4: Reinstall bolt and nut and tighten.

HANDLE

STEP 1: Remove nuts and bolts from bag. (These are

special lock nuts. A wrench will be required to remove

and install them).

STEP 2: Bolt handle in place using bolt & nut

ROW MARKER

STEP 1: Place row marker shaft in front of row marker bracket

and line up holes

STEP 2: Insert clevis pin through row marker shaft and row

marker bracket and insert hair pin clip through clevis pin. When

not in use, strap the row marker shaft to the handle with the Velcro

strap.

Place Velcro behind the row

marker with the Earthway logo to

the right in the upright direction

2)Insert Velcro through the buckle

and pull tight-secure Velcro

together