EarthWise CCS30008 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} EarthWise CCS30008. EarthWise CCS30008 11 pagina's. Cordless 18 volt chain saw
Pagina afdrukken
ASSEMBLY
I
I
UNPACKING
This product requires no assembly.
Carefully remove the product and any aCt.l<>ssoties from the box
Make sure that ali items liS/ed in !he
packIng
list are included.
Inspect the product carefully to make sure no breakage or damage
occurred duling shipping.
Do not discard the
material until you have carefully
inspected and satis«,ctc,rily operated the prOduct.
, WARNING: If any parts are
or missing do not operata
this product until the parts are
Failure to heed this
warning could result in serious persona! injury.
If any parts are damaged or missing. please call
1-800-313-5111 for assIstance.
PACKING LIST
• Chain Saw (fully assembled)
- Charger and Battery Pack
Blade Cover
- One bottle of oil
-Instruction Manual
OPERATING
(
I
TO TURN THE TOOL ON
Push the lock button in with your thumb and then squeeze the
your fingers. (Once the tool is running, you can
lock button). To turn the tool OFF, release the trigger.
. WARNING:
To guard against injury, observe the following:
Read instruction manual before using, save
instruction manual.
Keep hands away fncm chain.
Keep hands on handles. Don't overreach
A good, firm
gnp
on the saw with both hands
will
help you maintain
control. Don't let go. Grip the rear handle with your right hand
whe!~.er
you are right or left handed. Wrap the fingers of your
left
hand over and around the front handlebar, and your left thumb
under the front handlebar.
Make sure you follow the instructions In maintenance for putting
oil in the chain ssw.
. CAv'TION: Failure to lubricate the chain will cause damage to the bar
._.. and chain. The type of the chain oil is #32 lubricant. One bOttle of
3.5 fl. oz. (10OmI) #32lubricanl 0,1 is included In the
package,
One minute of use will consume approx. 0.15
fl.
oz.
(5mI) of oil.
NOTE:
II
Is normal for oil to seep from the saw when not in use.
To prevent seepage, empty the oil tank _ r each use. When
staring the unit for a long period of lime (3 months or
be
sure the chain is lightly lubricated; this will prevent rust on
chain and bar sprocket.
WARNING: Do Not use the chain saw with any type of accessory
or attachment SUCh usage might be hazardous.
CUTTING INSTRUCTIONS
00
not operate charn saw in a tree, on a ladder, or on a scaffold;
this is extremely dangerous.
CAUTION: Chain coasts after turned off.
Do not use under
wet
conditions.
Use extreme caution when cutting small size brush, saplings or
limbs under tenSion, because slender and tense material may
catch the saw and be whipped toward you, pull you off balance or
spring back.
Do not cut vines and/or small underbrush.
WARNING: Do not allow familiarity with this type of tool to make
you careless Remember that a careless fraction of a second is
suffiCient to inflict serious injury.
BefOre you start the unit. make sure the chain saw is not contacting
any object
!
WARNING: Kickback may occur when the moving chain contacts
an object at the upper portion of the tip of
t~e
guide bar or when
the wood closes in and pinches the chain saw in the cut. Contact
at the upper portion Of the tip of the guide bar can caUSe the
chain to dig inlo the object and stop the chain for an instant. The
result is a lightening fast. reverse reaction which kicks the guide
bar up and back toward the operator. lithe chain saw is pinched
alonglhe top of the guide bar. Ihe gUide bar can be driven rapidly
baCk toward the operator. Either of these reactions can cause
loss of saw control whiCh can result in serious injury. Do not rely
exclusively upon the safety devices built into the saw. As a chain
saw user, you should take several steps to keep your cutting jobs
free from accident or injury.
The following precautions should be followed to
minimIze kickback:
Always grip the saw firmly with both hands. Hold the saw
firmly with bOth hands when the unit is running. Place your
right hand on the rear handle and your left hand on the front
handle with your thumbs and fingers encirCling me chain
saw handles. A
f<rm
grip togelherwlth a s!Jffleftarm
will
help
you
maintain control of the s""if
kJckback
occurs.
2.
Make sure that the area in which you are cutting is free
from obstructions. Do not let the nose of the guide bar
contact a log, branch, fence or any other obstruction that
could be hit while you are operating the saw.
3.
Always cut with
the
unrt running at full speed. Fully squeeze
the throttle trigger and maintain a steady
cutting
speed.
Push and PulI- This reaction force is always opposite
10
the
direction the chain is moving where wood contact is made. Thus,
the operator must be ready to control the PULL when cutting on
the bottom edge of the bar, and PUSH when cutting along the
top edge.
Wear non-slip gloves for maximum grip and protection.