EarthWise NVPS42108 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} EarthWise NVPS42108. EarthWise NVPS42108 14 pagina's. 18 volt, cordless convertible 2 in 1 pole saw / chain saw

Pagina afdrukken
Before you start the unit make sure the chain and bar are not
contacting any object.
TO TURN THE TOOL ON
Push the lock button in with your thumb and then squeeze the
trigger with your fingers. (Once the tool is running, you can
release the lock button). To turn the tool OFF, release the
trigger.
DO NOT PULL the trigger until you are ready to make a cut.
LOCK
BUTTON
TRIGGER
SWITCH
WARNING: To guard against injury, observe the following:
Read instruction manual before using, save instruction
manual. Keep hands away from chain. Keep hands on
handles. Don't overreach.
A good, firm grip on the pole and/or handles with both hands
will help you maintain control. When using the chain saw,
place your right hand on the rear handle and your left hand
on the front handle with your thumbs and fingers encircling
the chain saw handles. A firm grip together with a stiff left
arm will help you maintain control of the saw if kickback
occurs. When using as a pole saw, place one hand on the
pole and your other hand on the molded handle with your
thumbs and fingers encircling the pole and handle. A firm
grip together with positioning handle against your body will
help you maintain control of the saw. Don't let go.
WARNING: Do not operate saw in a tree, on a ladder, or on a
scaffold; tis is extremely dangerous.
CAUTION: Chain coasts after turned off.
Do not use under wet conditions.
Use extreme caution when cutting small size brush, saplings
or limbs under tension, because slender and tense material
may catch the saw and be whipped toward you, pull you off
balance or spring back.
Do not use saw to cut vines and/or small underbrush.
WARNING: Do not allow familiarity with this type of tool to
make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
OPERATING
WARNING: Do not cut trees near electrical wires or buildings.
CAUTION: Failure to lubricate the chain will cause damage to
the bar and chain. Use only a good quality bar and chain oil
or, if not available, unused SAE 30 weight motor oil may be
substituted. One minute of use will consume approx. 0.15 fl.
oz. (5ml) of oil.
NOTE: It is normal for oil to seep from the saw when not in
use. To prevent seepage, empty the oil tank after each use.
When storing the unit for a long period of time ( 3 months or
longer) be sure the chain is lightly lubricated; this will prevent
rust on the chain and bar sprocket.
WARNING: Do Not use the chain saw with any type of
accessory or attachment. Such usage might be hazardous.
WARNING: Kickback may occur when the moving chain
contacts an object at the upper portion of the tip of the guide
bar or when the wood closes in and pinches the chain saw in
the cut. Contact at the upper portion of the tip of the guide bar
can cause the chain to dig into the object and stop the chain
for an instant. The result is a lightening fast, reverse reaction
which kicks the guide bar up and back toward the operator. If
the chain saw is pinched along the top of the guide bar, the
guide bar can be driven rapidly back toward the operator.
Either of these reactions can cause loss of saw control which
can result in serious injury. Do
not rely exclusively upon the
safety devices built into the
saw. As a chain saw user,
you should take several steps
to keep your cutting jobs free
from accident or injury.
7