Christie Mirage SST Instructieblad
Blader online of download pdf Instructieblad voor {categorie_naam} Christie Mirage SST. Christie Mirage SST 5 pagina's. Installing rigging frame adapter plate
Pagina afdrukken
Installing the Mirage
SST Rigging Frame
Adapter Plate
This document provides details for installing the rigging frame adapter plate.
Affected products
The following products are affected:
•
Mirage SST
Required components
The following components are required.
•
Mirage SST Rigging Frame Adapter (P/N: 168-105107-XX)
•
Frame Rigging Percision 1 (P/N: 165-101103-XX)
Tools required
The following tools are required for installing the rigging frame.
•
8 mm hex key
•
10 mm hex key
Safety warnings and guidelines
Read all safety and warning guidelines before starting this procedure.
Danger! If not avoided, the following results in death or serious injury.
•
Do not stack the device unless specified in this manual.
•
The supporting structure must safely support the combined load of the product, all attached
hardware, and components following all local safety standards and regulations.
•
Use all mounting points, including the safety point, when installing the product overhead.
Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet
020-103164-02 Rev. 1 (08-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
1