Miele PW 6207 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele PW 6207. Miele PW 6207 40 pagina's.
Ook voor Miele PW 6207: Installatieplan (18 pagina's), Installatieplan (17 pagina's), Handmatig (48 pagina's)

Pagina afdrukken

Warning and Safety instructions

Explanation of the Warning and Safety

symbols on the machine

It is essential to read these operating

instructions.

Please refer to specific instructions, e.g.

Installation instructions

Caution, hot surfaces.

Caution, voltage up to 1000 volts.

Earthing

To avoid the risk of accidents and damage to the

machine read the operating instructions carefully

before using it for the first time. They contain

important information about the installation, safety,

use and maintenance of the machine. Keep these

operating instructions in a safe place and ensure

that new users are familiar with the content. Pass

them on to any future owner of the machine.

Correct application

This machine is not designed for washing items

which have been treated with dangerous or

flammable substances.

Only use the machine to wash items which are

specified by the manufacturer to be

machine-washable on the wash-care label.

Any other applications may be dangerous. The

manufacturer is not liable for damage resulting from

improper use or operation.

Chemical dry cleaning agents must not be used in

this machine. Most dry cleaning agents, e.g. benzine,

pose a fire and explosion hazard.

Petrol, paraffin, or any easily flammable liquid

must not be stored or used near the machine. Do not

use the machine lid as a storage shelf.

Fire and explosion hazard.

Do not store any chemicals on the machine lid

(liquid detergent, fabric conditioners etc). They could

discolour the lid and also damage the surface finish.

If any chemicals should come in contact with the

surface, wipe them away immediately with clean

water. Then dry with a soft cloth.

When used in a commercial environment ensure

that all operators are trained to use the machine

correctly.

If the machine is used in a publically accessible

room, please ensure that operators are able to use it

safely.

This machine is not suitable for outdoor use.

Technical and electrical safety

The electrical safety of this machine can only be

guaranteed if connected to a correctly installed

earthing system on site. It is most important that this

basic safety requirement is present and tested

regularly, and where there is any doubt, the on-site

electrical wiring should be inspected by a qualified

electrician. The manufacturer cannot be held liable

for the consequences of an inadequate earthing

system (e.g. electric shock).

Do not damage, remove or bypass the safety

features, fixtures and control elements of this

machine.

Do not use a machine with damaged controls or

cables. These must be repaired before it is used

again.

Any removable outer panels must be back in

place, and all moving or electrical parts shielded

before the machine is switched on.

Connection should be made via a suitable isolator

which complies with local and national safety

regulations and which is easily accessible for

disconnecting the machine from the electricity

supply. Provision must be made on site to switch off

all poles.

The machine is only completely isolated from the

electricity supply either when it is switched off at the

isolator switch or the mains fuse has been withdrawn.

Repairs to electrical, gas or steam operated

machines may only be carried out by a suitably

qualified person in accordance with national and

local safety regulations, e.g. a Gas Safe registered

service technician in the U.K for gas-heated

machines.

Repairs and other work by unqualified persons could

be dangerous.

The manufacturer cannot be held liable for

unauthorised work.

Do not force the drum door open. The door handle

is fitted with a safety device to ensure that the door

lock functions correctly.

Faulty components must only be replaced by

genuine Miele original spare parts. Only when these

parts are fitted can the safety standards of the

machine be guaranteed.