Miele WS 5320 Gebruiksaanwijzing - Pagina 28
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele WS 5320. Miele WS 5320 36 pagina's. Washer-extractor
Pagina afdrukken
Problem solving guide
PROGRAMME
PROGRAMME STOP
PRESSURE MONITOR FAULT
^ Call the Miele Technical Service Depart-
ment.
PROGRAMME
PROGRAMME STOP
DISPENSING SYSTEM-FAULT
Dispensing container 1 empty.
^ Change the dispensing container.
PROGRAMME
PROGRAMME STOP
HEATER SYSTEM FAULT
Dry step switch has cut out.
^ Call the Miele Technical Service Depart-
ment.
Possible reasons for excessive suds:
Detergent type
^ Only use detergent formulated for use in
commercial washer-extractors. Domestic
laundry detergent is not suitable.
Overdosing of detergent
^ Dispense detergent following the deter-
gent manufacturer's instructions on the
packaging and adjust to local water hard-
ness levels.
Detergent creates too many suds
^ Use a low sudsing detergent or contact
your detergent application specialist.
Very soft water
^ In areas with soft water dispense less de-
tergent.
Soiling level of the laundry
^ For lightly soiled laundry dispense less de-
tergent.
28
1
COTTONS
1
COTTONS
1
COTTONS
Residues, e.g. detergent left on laundry
^ Run an additional Prewash without deter-
gent and without selecting a temperature.
Laundry which has been soaked before
washing must be thoroughly rinsed before
running a wash program.
Small loads
^ Reduce the amount of detergent dis-
pensed according to the size of the load.
Drum speed too high during the wash
(Profitronic-controls)
^ Reduce the drum speed and wash rhythm.
Water hardness levels
Hard-
Water
ness
quality
range
I
soft
II
medium
III
hard
IV
very hard
*) Contact the local water authority for the
hardness level of the water supplied to the
machine.
Hardness
Hardness
level in ppm*
level in
gr/gal*
0 - 130
0 - 7
131 - 250
7 - 14
251 - 380
14 - 21
over 380
over 21