Allmand Night-Lite E Series Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Allmand Night-Lite E Series. Allmand Night-Lite E Series 20 pagina's. Portable light tower

Pagina afdrukken

Figure 10

Raising and Lowering The Light

Tower Mast

DANGER

Electrocution Hazard

• Raising the light tower mast in the

presence of electrical power lines

will result in death or serious injury.

Always check overhead wires and

obstructions before raising or lower-

ing the light tower mast.

WARNING

Tipover Hazard

• Before raising, lowering or operating

the tower lights, the unit must be set

up, properly leveled and stabilized.

See Pre-Operation Setup.

WARNING

Crush Hazard

• Standing under the light tower mast

while raising or lowering could result

in death or serious injury. Make sure

that there are no persons near the

portable light tower when raising or

lowering the light tower mast.

Raising the Light Tower Mast

1. Before raising the light tower mast,

adjust the tower lights to the desired

work position. See Adjusting The

Lights.

2. Unlatch and open the control panel

door (A, Figure 11).

3. Turn the main circuit breaker (B,

Figure 11) to the ON position.

4. Turn the Tower / Light switch (C,

Figure 11) to the TOWER position.

5. Remove the remote tower control (D,

Figure 11) from the control panel and

stand back from the unit base.

Figure 11

6. Move the remote tower control switch

to the UP position until the tower is

fully raised (A, Figure 13).

7. Remove the hair pin cotter (A, Figure

12) and tower mast locking pin (B)

from the stowing hole shown in Figure

12. Insert the tower locking pin in the

locking hole (C), and secure with the

hair pin cotter.

Figure 12