Miele G 2 Series Handmatig - Pagina 3
Blader online of download pdf Handmatig voor {categorie_naam} Miele G 2 Series. Miele G 2 Series 46 pagina's.
Ook voor Miele G 2 Series: Handmatig (14 pagina's)
Pagina afdrukkenG 1xxx/G 2xxx
1
Customer Programming
The customer programming mode includes certain parts of the service
programming mode. All programming options can be carried out in service
programming mode (see Section 2).
Close the appliance door and switch off the power before accessing customer
programming mode.
To save settings, switch off the appliance after making changes.
Note:
Customer programming mode is not available on Excella or LaPerla
machines; instead, these machines feature a Settings menu. Refer to the
appropriate operating instructions.
Model
G 118x/G 2170/G 218x
(See Section 2.1 for option
descriptions.)
G 1202
(See Section 2.2 for option
descriptions.)
G 1262
(See Section 2.3 for option
descriptions.)
G 147x/G 247x
(See Sections 2.4 and 2.5 for
option descriptions.)
G 2020
(See Section 2.6 for option
descriptions.)
Access Procedure
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Press and hold Program and
Start/Stop buttons.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Program and Start/Stop
buttons.
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Turn the control dial to the 12
o'clock position.
2. Press and hold Start/Stop button.
3. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
4. Release Start/Stop button.
3
Technical Information
Available Options
Water hardness
Rinse aid
Buzzer on/off
Reset standard settings
Water hardness
Rinse aid
Adjust Sensor Wash
Reset standard settings
Rinse aid
Buzzer on/off
Reset standard settings
Check and set water
hardness (up to ID -1080);
activate/ deactivate
softener sensor, set water
hardness (after ID -1080)
Rinse aid
Buzzer on/off
Adjust Sensor Wash
program (after ID -984)
Check water hardness
(after ID -1080)
Reset standard settings
Water hardness (3 o'clock)
Rinse aid (5 o'clock)
Resetting standard
settings (11 o'clock)