Miele NOVOTRONIC G 842 PLUS Gebruiksaanwijzing - Pagina 18
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele NOVOTRONIC G 842 PLUS. Miele NOVOTRONIC G 842 PLUS 48 pagina's. Miele dishwasher user manual
Ook voor Miele NOVOTRONIC G 842 PLUS: Gebruiksaanwijzing (49 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 2. Changing a Program
- 3. Program Guide
- 4. Frequentjy Asked Questions
- 5. After Sales Service
- 6. Transport
- 7. User Maintenance Instructions
- 8. Cleaning the Filter in the Wash Cabinet
- 9. Cleaning the Spray Arms
- 10. Cleaning the Wash Cabinet
- 11. Cleaning the Door and Door Seal
- 12. Cleaning the Exterior
- 13. Cleaning the Water Inlet Filter
- 14. Cleaning the Drain Pump and Non-Return Valve
Before
using for the first time
Salt indicator
When the salt reservoir is empty, the
"Salt-PC" indicator will light, indicating
that it should be refilled with reactiva-
tion sail
Start
Intake/Drain O
Salt P_/
Rinse aid
O
After the reservoir has been filled, the
water softener is automatically
reacti-
vated the next time the dishwasher is
started. The "Salt" indicator will be lit
during this process.
Bypassing
the salt indicator
If your water is soft (below 8 gr/ga!) the
salt reservoir should not be filled with
salt. The indicator will remain lit and
should be disregarded
or bypassed.
[] Remove the salt reservoir cap.
Looking into the salt reservoir, you will
see the top of the float chamber on the
right hand side, _.
[] Using a screwdriver, carefully pivot
the float chamber towards the center
of the reservoir.
[] Using needle nose pliers, pull the
cap, _, off of the float chamber, and
remove the float, ,_@.
Replace the float chamber cap, push
the chamber back into its upright posi-
tion, and replace the salt reservoir cap.
The "Salt" indicator should no longer be
lit.
18