Miele CS 1028 Bedienings- en installatie-instructies - Pagina 33

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele CS 1028. Miele CS 1028 44 pagina's. Combiset
Ook voor Miele CS 1028: Bedienings- en installatie-instructies (44 pagina's), Instructies omzetten (40 pagina's), Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (44 pagina's)

Installing the appliance /

appliances

^ Feed the power cord down through

the cut-out.

^ Place the front edge of the appliance

into the cut-out.

^ With a hand on each side of the

appliance press down evenly on the

edges until it clicks into position.

When doing so make sure that the

appliance seal sits tightly on the

countertop to ensure it is sealed

correctly. This is important to ensure

an effective seal. Do not permanently

seal into the countertop.

When installing more than one

appliance, a sealing strip must be

inserted into the support bar.

^ Push the installed appliance to the

side until the slots in the support bar

are visible.

^ Insert the sealing strip

slots in the support bar

^ Place the front edge of the next

^ Connect the appliance / appliances

^ Turn the appliance / appliances on

The appliance may be lifted out

using a special tool.

The appliance can also be pushed

up and out from underneath.

Note: push the rear out first.

If the appliance is accessible from

below, it can be pushed up and out of

the cut-out. Push up from the back first.

If the appliance is not accessible from

below, grip the appliance with both

hands at the back, pull forward, then lift

it up and out.

into the

appliance into the cut-out.

to the main power supply (see

"Electrical connection").

and check the function.

Installation