Miele DGC 6800 Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Miele DGC 6800. Miele DGC 6800 2 pagina's. 24" built-in coffee system
Ook voor Miele DGC 6800: Handleiding voor installatie-instructies (21 pagina's), Handleiding voor installatie-instructies (15 pagina's)

Pagina afdrukken

Cleaning and care

Descaling

Cleaning the milk pipework

Degreasing the brew unit

Descaling must be carried out and takes

approx. 20 minutes.

The milk pipework must be cleaned with

After 200 portions have been dispensed,

You will need 2 descaling tablets.

Degrease the brew unit " will appear in the

the cleaning agent. Cleaning takes approx.

7 minutes.

display. This message will not go out until

The descaling process cannot be

the brew unit has been degreased.

cancelled once it has started. The

You need one sachet of the Miele cleaning

process has to be carried through to the

agent for milk pipework.

You need 1 Miele cleaning tablet to

end.

degrease the brew unit. The process takes

The cleaning process cannot be

approx. 10 minutes.

Maintenance "  in the main

cancelled once it has started. The

Touch "

Descale the appliance ".

process has to be carried through to the

The cleaning process cannot be

menu and then "

end.

cancelled once it has started. The

The descaling process will now start.

process has to be carried through to the

Maintenance "  in the main

Follow the instructions in the display.

Touch "

end.

Clean the milk pipework ".

menu and then "

Touch "

Maintenance "  in the main

The process will start.

menu and then "Degrease the brew

Follow the instructions in the display.

unit".

The process will start.

Follow the instructions in the display.

Place a cleaning tablet in the ground

When "

coffee chute and close the chute " appears in

the display:

Fill the water container with lukewarm

water up to the level marker  and drop

2 descaling tablets in it. Replace the

water container.

Fill the water container with lukewarm

water up to the level marker  and add

Follow the instructions on the packet for

the mixing ratio carefully. It is important

1 sachet of Miele milk pipework cleaning

that you fill the water container with the

agent to it. Replace the water container.

correct amount of water (not less or

Rinse and refill the water container "

When "

more), otherwise descaling will be cut

appears in the display:

short and must then be repeated.

Remove the coffee chute cover and

Remove the water container and rinse it

open the lid of the coffee chute. Place a

When "

Rinse the water container and fill with

carefully with clean water.

fresh tap water up to the  symbol " appears

cleaning tablet into the coffee chute.

Make sure that no cleaning agent is left

Follow the further instructions given in

in the display:

in the water container.

the display.

Remove the water container and rinse it

The cleaning process is finished when

carefully with clean water.

The brew unit has been degreased when

Process finished " appears in the display.

Make sure that no descaling agent is left

in the water container.

Process

Descaling is finished when "

finished " appears in the display.

Tips for use

Changing the portion size or

Setting the drink parameters

Profiles

drink parameters

Drink parameters "

Touch "

You can set up individual user profiles and

The following parameters can be set:

save individual portion sizes for all drinks

The changed portion size or drink

for each profile.

parameter is always stored in the current

– Amount of coffee

profile.

The name of the current profile is shown in

– Brew temperature

The name of the current profile is shown in

the top left of the display.

– Pre-brewing

the top left of the display.

OK " when you have set the

Touch "

Accessing a profile

Start in the drinks menu.

parameters to your requirements.

Profiles "  in the main menu or

Touch "

Place the desired cup under the central

Profiles " in the bottom right of the

touch "

Resetting drinks

spout.

Drinks menu.

Process " and then " Change drink ".

Touch "

To reset the portion sizes and the

parameters for all drinks back to their

Creating a profile

Swipe the screen until the drink you

factory default setting:

want appears, then touch it to select it.

Touch "

Create profile ".

Process " in the Drinks menu and

Change the portion size " or

Touch "

You can now "

The keyboard will open in the display.

Reset drinks ".

Drink parameters ".

then "

programme "

Enter the name you want and touch

Reset all drinks to default? " will appear in

OK ".

Changing the portion sizes

the display.

If you have already created a profile, the

Yes ".

Change the portion size ".

Touch "

following options are available to you:

The desired drink will be prepared and

– Select profile

Save " will appear in the display.

– Change name

Save " when the cup has been

Touch "

– Delete profile

filled to the level you want.

– Change profile

If you want to change portion sizes for

Manually ",

(The coffee machine changes "

Cappuccino, Latte macchiato or Caffè

After each use " or " When switched on ").

latte, the ingredients will be shown in the

display.

Processing drinks for a profile

Touch the ingredients you want to set

the portion size for.

You can create your own drinks for each

profile and set the portion size and drink

The ingredients selected will have a tick 

parameters individually.

beside them.

You can change the names of drinks in a

OK ".

Touch "

profile.

Touch "

Save " when the amount you want

Select the profile you want.

of the particular ingredient has been

dispensed.

Creating a drink

Save the portion size required for the

Touch "

Create drink " and select the

selected ingredients.

required drink from the standard drinks.

The programmed mix of ingredients and

Change the drinks parameters as

portion sizes will now be dispensed every

required. Save the amount you want of

time that particular drink is selected.

the individual ingredients.

Tip: You can cancel portion size

programming as long as "

Stop " is showing

in the display.

Settings

After dispensing, the keyboard will open in

Changing settings

the display.

OK " to save the setting.

Touch "

Settings "  in the main menu

Select "

Enter a name for the new drink and

Tip: Touch  to return to the previous

Save ".

Select the menu option you want and

touch "

menu.

change the setting as required.

If you have already created a drink, the

following options are available to you:

– Change drink

– Delete drink

Option

Available settings

Notes

You can save a maximum of 9 drinks in a

Language

Deutsch, English and other languages

Tip: If you select the wrong language by mistake, you can find the "

profile.

Country

flag symbol .

Time

Display (On / Off / Night dimming)

Your choice of display will affect the energy consumption of your coffee machine. A message about

MyMiele

Clock type (Analogue / Digital)

this will appear in the display.

Clock format (12 h / 24 h)

You can display drinks you make

frequently, drinks from profiles and

Set

maintenance programmes in the MyMiele

Date

Year / Month / Day

screen.

Timer

Timer 1 (Switch on at, Switch off at, Switch

For "

off after)

must be allocated.

Opening the MyMiele  menu

Timer 2 (Switch on at, Switch off at)

MyMiele "  in the main menu.

Touch "

Eco mode

On / Off

MyMiele " and add

You can now configure "

Lighting

Brightness

entries ("

Add entry ").

(Machine switched on or switched off)

Switch off after

To add entries

Start screen

Main menu

You can select options listed in the

Drinks menu

following categories:

Profiles

– Drinks 

MyMiele

– Profiles 

Info

Number of drinks

– Maintenance 

No. of uses until descaling / degreasing the brew unit.

Add entry ".

Touch "

System lock

On / Off

When the system lock is activated, the "

Water hardness

Soft, Medium, Hard, Very hard

If you have already added some entries,

Display brightness

Set

you can carry out the following under

Volume

Buzzer tones

Process ":

Keypad tones

– sort or

Showroom programme

Demo mode (On / Off)

Only for demonstration purposes in showrooms or exhibitions. Do not activate this setting for domestic

– delete entries.

use!

Plate warmer

Automatic / On / Off

Spout adjustment

On / Off

The height of the central spout cannot be adjusted manually.

Factory default

Settings

Please note that the following settings will not be reset: Language, Time, Number of drinks dispensed,

User profiles

MyMiele

Plumbed water supply

On / Off

(Only applies to CVA 6805)

Quick Start Guide

Built-in coffee machine

Language " option by following the

Switch on at " and " Switch off at ", the timer must be activated and at least one day of the week

Switch on at " option for the timer cannot be selected.

This Quick start guide does not replace the Operating and installation instructions. It

is essential to read the Operating and installation instructions to familiarise yourself

with how to use the coffee machine before using it for the first time. Please pay

particular attention to the Warning and Safety instructions.

en - GB

M.-Nr. 09 856 991