Miele DA 186 Bedienings- en installatie-instructies - Pagina 23
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 186. Miele DA 186 28 pagina's. Cooker
Ook voor Miele DA 186: Bedienings- en installatie-instructies (28 pagina's), Bedienings- en installatie-instructies (28 pagina's), Bedienings- en installatie-instructies (28 pagina's), Bedienings- en installatie-instructies (36 pagina's)
Pagina afdrukken
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous, for which the
manufacturer cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
The connection data is given on the
data plate. This is visible when the
grease filters have been removed.
Ensure that this data matches the
household mains supply.
Connection of this appliance should be
made via a suitable isolator or a double
pole fused spur connection unit which
complies with national and local safety
regulations and the On-Off switch
should be easily accessible after the
appliance has been built in.
Electrical connection
If the switch is not accessible after
installation (depending on country), an
additional means of disconnection must
be provided for all poles.
For extra safety, it is advisable to install
a residual current device (RCD).
Contact a qualified electrician for
advice.
Important
This appliance is supplied for
connection to an AC 230 V single
phase 50 Hz supply.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue = neutral
Brown = live
WARNING:
THIS APPLIANCE MUST BE EARTHED
23