Miele DA 220-3 Bedienings- en installatie-instructies - Pagina 26

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 220-3. Miele DA 220-3 32 pagina's. Ventilation system
Ook voor Miele DA 220-3: Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (32 pagina's), Bedienings- en installatie-instructies (36 pagina's)

Installation

^ Insert the short edge of the two

spring clips into their slots from

below and pivot them 90° so that the

tab faces the center of the mounting

brake.

^ Pull the power cord through the

mounting plate.

^ Insert the four countersunk screws

M 6 x 20 into the recessed holes from

above.

^ Tape the screws from above to

prevent them from being pushed

upwards when the nuts are tightened.

^ Screw the mounting plate through the

ceiling and into the structural framing

using 8 x 60 lag bolts and washers.

Once tight, make sure that the

mounting plate can safely support

the weight of the hood.