Miele DA 249-2 Bedienings- en installatie-instructies - Pagina 16
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 249-2. Miele DA 249-2 36 pagina's.
Pagina afdrukken
Cleaning and care
Before any cleaning or maintenance
work disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the wall socket
and the plug has been withdrawn
(do not pull on the cable, only on the
plug), or
– the fuse has been withdrawn from
the fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
Housing
General notes
Warning: The surfaces and controls
are susceptible to scratches and
abrasion. Please observe the follow-
ing cleaning instructions:
^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
well wrung out soft sponge or cloth.
^ Wipe dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Please observe the instructions below
for cleaning stainless steel, aluminium
and glass surfaces.
16
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals.
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for ad-
dress.
Important for appliances with a
stainless steel housing:
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive clean-
ing agent designed specifically for use
on stainless steel.
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents e.g. pow-
der cleaners or cream cleaners
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents. These will damage the sur-
face material.
To help prevent re-soiling, proprietary
conditioning agents for stainless steel
can also be used.
Apply sparingly with an even pressure.