Miele DA 249-2 Bedienings- en installatie-instructies - Pagina 20

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 249-2. Miele DA 249-2 36 pagina's.

Cleaning and care

Fitting / replacing the active

charcoal filter

If the cooker hood is connected for

recirculation, an active charcoal filter

must be inserted in addition to the

grease filter. It is designed to absorb

cooking odours.

It is fitted in the chimney above the

grease filter.

Active charcoal filters can be ob-

tained from your dealer or the Miele

Spare Parts Department.

Refer to the section "Technical data"

for type and reference number.

^ Before fitting or replacing the active

charcoal filter, the stainless steel filter

and the grease filter must first be

taken out, (see previous section for

instructions on how to do this).

^ When fitting for the first time:

A guide is installed for extraction

mode which has to be removed for

recirculation mode.

Slightly loosen the two screws on this

guide and pull it off.

^ To remove the charcoal filter pull

down on the tab at the back of the fil-

ter.

^ Take the new filter out of its packag-

ing.

^ Fit the filter into the front of the chim-

ney and push it upwards at the back

and press it firmly into position.

^ Replace the grease filter and the

stainless steel filter.

When fitting for the first time:

^ Set the operating hours counter to

suit your requirements, (see "Opera-

tion – Setting / Altering the filter oper-

ating hours counter").