Miele DA 249-4 Alu EXT Bedienings- en installatie-instructies - Pagina 31
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 249-4 Alu EXT. Miele DA 249-4 Alu EXT 44 pagina's.
Ook voor Miele DA 249-4 Alu EXT: Bedienings- en installatie-instructies (40 pagina's)
Pagina afdrukken
2 protective sheets
for use when fitting the tower.
1 exhaust connection for exhaust
ducting C 150 mm.
1 reducing collar
for exhaust ducting C 125 mm.
1 non-return valve
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode).
Upper retaining plate
for securing the extension piece.
Middle retaining plate
for securing the extension piece.
Lower retaining plate
for securing the appliance unit.
Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose with clips (this is not
included, but is available as an
optional extra - see Technical Data).
8 large headed screws 5 x 40 mm and
8 x S 8 plugs
for securing the retaining plates.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
2 x M4 screws with nuts and plastic
washers
for securing the glass canopy
1 cover cap
1 lever for removing the tower.
Installation sheet DIN A3
Installation
31